Emerson Network Power MPH2 User Manual

Operation
Emerson
®
MPH2
™
User Manual 29
3.3.3 Restore System Defaults
Table 3-1 describes the factory-default settings.
1. Use the arrow keys to highlight the information icon, , and press .
2. Use an arrow key highlight the reboot/restore-defaults icon, , and press .
The Reboot Options display, Figure 3-6.
Figure 3-7 Restore Defaults selected on Reboot Options
3. Use the arrow keys to highlight an up/down arrow at the bottom-left, and press
to highlight Restore Defaults.
4. Use the arrow keys to highlight the play button, , and press .
The Restore Defaults? confirmation displays, Figure 3-8.
5. Use the arrow keys to highlight an up/down arrow, and press to highlight Yes/ Reboot to Default.
6. Press .
The system-default settings are restored.
Figure 3-8 Restore Defaults? confirmation

Emerson Network Power MPH2 Specifications

General

Brand	Emerson
Model	Network Power MPH2
Category	Power distribution unit
Language	English