Cerabar M
36 Endress+Hauser
➅ Version KL: DRD DN50 (65 mm) PN25, 3A with HNBR or EPDM seal;
Endress+Hauser offers a welding flange with PTFE seals for flush-mounted installation of a device with a
DRD flange. See the following graphic.
➆ Version AH: DIN 11851 DN 40 PN 40, 3A with HNBR or EPDM seal
➇ Version AL: DIN 11851 DN 50 PN 25, 3A with HNBR or EPDM seal
P01-PMC45xxx-06-09-xx-xx-003
Welding flange for flush-mounted installation for devices with a DRD flange.
Order number: 52002041, material: AISI 316L/1.4435;
Order number with 3.1: 52011899, material: AISI 316L/1.4435;
Only PTFE sealing ring: order number: 52024228
Aseptic couplings
P01-PMC45xxx-06-09-xx-xx-005
Process connections PMC45, aseptic couplings, material AISI 316L
Surface roughness of the surfaces in contact with the medium R
a
≤ 0.8 μm as standard. Lower surface roughness on
request.
➀ Version AS: aseptic DIN 11864–1 form A DN 40 for pipes to DIN 11850,
EHEDG, 3A with HNBR/EPDM seal
➁ Version AT: aseptic DIN 11864–1 form A DN 50 for pipes to DIN 11850,
EHEDG, 3A with HNBR/EPDM seal
ø125
ø50
ø66
ø105
M10
45°
3
12
16
15
20
ø84
ø54.9
ø26
Rd 65 x 1/6
153.5 (172.5)
21
163.5 (178.5)
ø66.8
ø26
Rd 78 x 1/6
153.5 (173.5)
22
163.5 (178.5)
➀
DIN 11864-1 A DN 40
➁
DIN 11864-1 A DN 50
To Next Page
Loading...
