Cerabar M
46 Endress+Hauser
Tri-Clamp pipe diaphragm seal (RDM)
P01-PMP46xxx-06-09-xx-xx-001
Process connection PMP46, EHEDG, 3A, material AISI 316L, surface roughness of the surfaces in contact with the medium
R
a
≤ 0.8 μm as standard. Lower surface roughness on request.
d
1
h
d
2
L
D
d
1
h
d
2
L
D
H
Version Nominal
diameter
ISO 2852
Nominal
diameter
Diameter Diameter Diameter Height Face-to-
face
length
T
K
Ambient
T
K
Process
Max. in-
stallation
height
Max. total
weight
Dd
1
d
2
hL H
[inch] [mm] [mm] [mm] [mm] [mm] [mbar/10 K] [mm] [kg]
SA DN 10 3/4 10.5 18 25 60 140 +5.4 +3.1 255 2.9
SB DN 25 1 22.5 43.5 50.5 67 126 +7.75 +4.49 262 2.9
SC DN 16 3/4 15.7 19 25 60 120 +5.4 +16.9 255 2.9
SG
1
DN 38 1 1/2 35.5 43.5 50.5 67 126 +5.17 +3.46 262 2.2
SL
1
DN 51 2 48.6 56.5 64 79 100 +3.56 +2.69 274 2.9
1) Including 3.1 and pressure test as per Pressure Equipment Directive, Category II
To Next Page
Loading...
