Endress+Hauser Cerabar M PMC41 - Page 48

Cerabar M
48 Endress+Hauser
APV-ISS nozzles with coupling nut
P01-PMP46xxx-06-09-xx-xx-004
Process connection PMP46, material AISI 316L, 3A, surface roughness of the surfaces in contact with the medium R
a
≤
0.8 μm as standard. Lower surface roughness on request.
DRD DN50 (65 mm)
P01-PMP46xxx-06-09-xx-xx-005
Process connection PMP46, version KL: material AISI 316L, 3A, surface roughness of the surfaces in contact with the
medium R
a ≤
0.8 μm as standard. Lower surface roughness on request.
f
H
G
D
m
SW/AF
h
d
M
Version Nomi-
nal dia-
meter
Nomi-
nal
pres-
sure
Dia-
meter
Adap-
ter
height
Thread Height Across
flats
Height Max. dia-
phragm
diameter
T
K
Ambient
T
K
Process
Max. in-
stallation
height
Max.
total
weight
Df G mAFhd
M
H
[inch] [bar] [mm] [mm] [mm] [mm] [mm] [mbar/10 K] [mm] [kg]
GG 1 1/2 PN 40 72 4 2" – 1/8" 30 62 70 34 +8.14 +2.59 265 1.9
GL 2 PN 40 89 4 2 1/2" – 1/8" 30 77 70 45 +5.4 +1.76 265 2.2
4xø11.5
ø65
–1.2
ø84
ø105
d =50
M max.
23.6
41
4xø11.5
ø65
–1.2
ø84
ø105
d =50
Mmax.
23.6
41
max. 226
Version Nominal pressure T
K
Ambient T
K
Process Max. total weight
[mbar/10 K] [kg]
KL PN 25 +2.26 +0.89 2.0