Endress+Hauser Cerabar M PMC41 - Page 49

Cerabar M
Endress+Hauser 49
Varivent
P01-PMP46xxx-06-09-xx-xx-006
Process connection PMP46, material AISI 316, 3A, surface roughness of the surfaces in contact with the medium R
a
≤ 0.8
*m as standard. Lower surface roughness on request.
Taper adapter with coupling nut, DIN 11851 (dairy fitting)
P01-PMP46xxx-06-09-xx-xx-007
Process connection PMP46, material AISI 316L, 3A, surface roughness of the surfaces in contact with the medium R
a
≤
0.8 μm as standard. Lower surface roughness on request.
40
ø68
d=50
M max.
h
D
d
M
H
Version Description Nominal
pressure
Diameter Height Max.
diaphragm
diameter
T
K
Ambient
T
K
Process
Max.
installation
height
Max. total
weight
Dhd
M
H
[bar] [mm] [mm] [mm] [mbar/10 K] [mm] [kg]
LB Type F for pipes
DN 25 – DN 32
PN 40 50 55 30 +7.75 +4.49 250 1.8
LL
1
Type N for pipes
DN 40 – DN 162
PN 40 68 55 50 +2.26 +0.89 250 2.1
1) Diaphragm seal versions compliant with ASME-BPE for use in biochemical processes, wetted surfaces R
a
≤ 0.4 μm (15.75 min; 240 grit), electropolished; to
be ordered using feature 60 "Additional option", version "P" in the order code
D
G
m
f
h
d
M
H
Taper adapter Slotted nut Diaphragm seal
Version Nominal
diameter
Nominal
pressure
Diameter Adapter
height
Thread Height Height Max. dia-
phragm
diameter
T
K
Ambient
T
K
Process
Max. in-
stallation
height
Max.
total
weight
Df G mhd
M
H
[mm] [bar] [mm] [mm] [mm] [mm] [mm] [mbar/10 K] [mm] [kg]
AG DN 32 PN 40 50 10 Rd 58 x 1/6 21 54 32 +8.14 +2.59 249 1.9
AH DN 40 PN 40 56 10 Rd 65 x 1/6 21 53 38 +5.4 +1.76 248 2.0
AL DN 50 PN 25 68.5 11 Rd 78 x 1/6 22 48 46 +2.21 +0.88 243 2.3