Endress+Hauser Cerabar M PMC41 - Page 50

Cerabar M
50 Endress+Hauser
Pipe diaphragm seal, threaded adapter DIN11851 (dairy fitting)
P01-PMP46xxx-06-09-xx-xx-008
Process connection PMP46, material AISI 316L/1.4435, 3A, surface roughness of the surfaces in contact with the medium
R
a
≤ 0.8 μm as standard. Lower surface roughness on request.
D
d
1
G
H h
L
L
1
D
d
1
G
H h
Version Nominal
diameter
Nominal
pressure
Diameter Diameter Thread Face-to-
face
length
Total
length
Height T
K
Ambient
T
K
Process
Max. in-
stallation
height
Max.
total
weight
Dd
1
GLL
1
hH
[mm] [bar] [mm] [mm] [mm] [mm] [mm] [mbar/10 K] [mm] [kg]
PB DN 25 PN 40 26.2 58 Rd 52 x 1/6 126 140 76 +16.03 +5.17 271 3.0
PH DN 40 PN 40 38 78 Rd 65 x 1/6 126 140 86 +5.4 +1.76 281 4.4
PL DN 50 PN 25 50.7 88 Rd 78 x 1/6 100 114 91 +2.21 +0.88 286 3.8