Ecograph T, RSG35 Appendix
Endress+Hauser 123
User entry IP address
Factory setting 000.000.000.000
Domain Name System (DNS)
Navigation Expert → Communication → Ethernet → Domain Name System (DNS)
Direct access code: 150009-000
Description Please enter the IP-address of the DNS server (you can get this from your network
administrator).
Is needed if you wish to send e-mails and want to use the e-mail server name instead of
the IP address (e.g. smtp.example.org).
Only editable if DHCP = no.
User entry IP address
Factory setting 000.000.000.000
Disable port
Navigation Expert → Communication → Ethernet → Disable port
Direct access code: 150020-000
Description You can disable unused ports for security reasons.
CDI is the protocol that the configuration software or reporting software uses to
communicate with the device.
All other ports (e.g. SNTP, SMTP, Web server) are automatically disabled if the
function is switched off.
Options CDI, OPC, Modbus Slave
Factory setting ---- (no port disabled)
Port
Navigation Expert → Communication → Ethernet → Port
Direct access code: 150001-000
Description The system communicates with the PC software through this communication port.
If your network is protected by a firewall, this port may have to be enabled. Please
contact your network administrator if this is the case.
User entry Number (max. 5 digits)
To Next Page
Loading...
Need help?
General