Technical data iTEMP TMT82
56 Endress+Hauser
12.6 Mechanical construction
Design, dimensions Dimensions in mm (in)
Head transmitter
24.1 (0.95)
33 (1.3)
! 44 (1.73)
! 7 (0.28)
! 5 (0.2)
B
C
A
A0007301
16 Version with screw terminals
A Spring travel L ≥ 5 mm (not for US - M4 securing screws)
B Mounting elements for attachable measured value display TID10
C Service interface for connecting measured value display or configuration tool
A0007672
17 Version with spring terminals. Dimensions are identical to the version with screw terminals, apart from
housing height.
DIN rail device
17.5 (0.69)
114.9 (4.52)
100 (3.94)
112.8 (4.44)
A0017808
To Next Page
Loading...
