Endress+Hauser iTEMP TMT82 - Page 57

iTEMP TMT82 Technical data
Endress+Hauser 57
Field housing
All field housings have an internal shape and size in accordance with DIN EN 50446, flat
face. Cable glands in the diagrams: M20x1.5
TA30A Specification
107.5 (4.23)
68.5 (2.7)
28
(1.1)
78 (3.1)
15.5 (0.6)
A0009820
• Two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) without
cable gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Cable entry glands: 1/2" NPT and M20x1.5
• Color of head: blue, RAL 5012
• Color of cap: gray, RAL 7035
• Weight: 330 g (11.64 oz)
TA30A with display window in cover Specification
107.5 (4.23)
91.6 (3.61)
28
(1.1)
78 (3.1)
15.5 (0.6)
A0009821
• Two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) without
cable gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Cable entry glands: 1/2" NPT and M20x1.5
• Color of head: blue, RAL 5012
• Color of cap: gray, RAL 7035
• Weight: 420 g (14.81 oz)
TA30H Specification
125 (4.92)
89.5 (3.52)
28
(1.1)
78 (3.01)
20.5 (0.8)
A0009832
• Flameproof (XP) version, explosion-protected, captive
screw cap, with two cable entries
• Temperature: –50 to +150 °C (–58 to +302 °F) for rubber
seal without cable gland (observe max. permitted
temperature of cable gland!)
• Material: aluminum; polyester powder coated
• Cable entry glands: ½" NPT, M20x1.5
• Color of head: blue, RAL 5012
• Color of cap: gray, RAL 7035
• Weight: approx. 640 g (22.6 oz)