iTEMP TMT82 Technical data
Endress+Hauser 59
12.7 Certificates and approvals
CE mark The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
Ex approval Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by
your E+H Sales Center on request. All explosion protection data are given in separate
documentation which is available upon request.
Maritime guidelines For the type approval certificates (GL, BV etc.) currently available, please contact your
Endress+Hauser Sales Center for information. All data relating to shipbuilding can be
found in separate type approval certificates which can be requested as needed.
UL approval UL recognized component (see www.ul.com/database, search for Keyword "E225237")
CSA GP CAN/CSA-C22.2 No. 61010-1, 2nd edition
Functional safety SIL 2/3 (hardware/software) certified to:
• IEC 61508-1:2010 (Management)
• IEC 61508-2:2010 (Hardware)
• IEC 61508-3:2010 (Software)
HART® certification The temperature transmitter is registered by the HART
®
Communication Foundation. The
device meets the requirements of the HART
®
Communication Protocol Specifications,
Revision 7.0.
Examination certificate In compliance with WELMEC 8.8: "Guide on the General and Administrative Aspects of the
Voluntary System of Modular Evaluation of Measuring Instruments."
12.8 Documentation
• Functional Safety Manual 'iTEMP TMT82' (SD01172T/09/en)
• Supplementary ATEX documentation:
ATEX II 1G Ex ia IIC: XA00102T/09/a3
ATEX II2G Ex d IIC: XA01007T/09/a3 (transmitter in field housing)
ATEX II2(1)G Ex ia IIC: XA01012T/09/a3 (transmitter in field housing)
To Next Page
Loading...
