Liquistation CSF48 Inputs: SAC
157
15 Inputs: SAC
15.1 Basic settings
15.1.1 Sensor identification
15.1.2 Application
Calibration data records are saved under an individual name in the sensor. A new sensor is
calibrated at the factory and thus already has appropriate data records. You can add your
own data records during each calibration. These are then available for selection under
"Application".
15.1.3 Damping
--> "Inputs: General/Frequently occurring functions" section ä 108
Path: Menu/Setup/Inputs/<Sensor type>
Function Options Info
Channel Options
•On
•Off
Factory setting
On
On
The channel display is switched on in the measuring
mode
Off
The channel is not displayed in the measuring mode,
regardless of whether a sensor is connected or not.
Sensor type Read only
(Only available if a sensor is
connected)
Connected sensor type
Order code Order code of the connected sensor
Path: Menu/Setup/Inputs/SAC
Function Options Info
Basic application Options
•SAC
•Transm.
•Absorption
•COD
•TOC
•DOC
•BOD
Factory setting
SAC
Preselection for saved calibration data records
Application Options
• Factory calib.
• 5 other data records
Factory setting
Factory calib.
Select a saved calibration data record
To Next Page
Loading...
