Endress+Hauser Liquistation CSF48 - 13 Inputs: Chlorine; Basic Settings

Inputs: Chlorine Liquistation CSF48
144
13 Inputs: Chlorine
13.1 Basic settings
13.1.1 Sensor identification
13.1.2 Main value
13.1.3 Damping
--> "Inputs: General/Frequently occurring functions" section  ä 108
13.1.4 Manual hold
--> "Inputs: General/Frequently occurring functions" section  ä 108
Path: Menu/Setup/Inputs/<Sensor type>
Function Options Info
Channel Options
•On
•Off
Factory setting
On
On
The channel display is switched on in the measuring
mode
Off
The channel is not displayed in the measuring mode,
regardless of whether a sensor is connected or not.
Sensor type Read only
(Only available if a sensor is
connected)
Connected sensor type
Order code Order code of the connected sensor
Path: Menu/Setup/Inputs/Chlorine
Function Options Info
Main value Options
• Concentration
•Sensor current (nA)
Factory setting
Concentration
Decide how you want to display the main value.