Endress+Hauser Liquistation CSF48 - Date and Time

Liquistation CSF48 General settings
7
2.2 Date and time
Path: Menu/Setup/General settings/Date/Time
Function Options Info
Set date Depends on the format Editing mode:
DD (day): 01 to 31
MM (month): 01 to 12
YYYY (year): 1970 to 2106
Set time Depends on the format Editing mode:
hh (hour): 00 to 23 / 0 am to 12 pm
mm (minutes): 00 to 59
ss (seconds): 00 to 59
Extended setup
Date format Options
• DD.MM.YYYY
• YYYY-MM-DD
• MM-DD-YYYY
Factory setting
DD.MM.YYYY
Decide which date format you want to use.
Time format Options
• HH:MM am (12h)
• HH:MM (24h)
• HH:MM:SS (24h)
Factory setting
HH:MM:SS (24h)
Decide whether you want to use the 12-hour or 24-hour
clock. Seconds can also be displayed with the latter
version.
Time zone Options
•None
• Choice of 35 time zones
Factory setting
None
If no time zone is selected, then Greenwich Mean Time
is used (London).
DST Options
•Off
•Europe
•USA
•Manual
Factory setting
Off
The controller adapts the summertime/normal time
changeover automatically if you choose European or
American daylight saving time.
Manual means that you can specify the start and end of
daylight saving time yourself. Here, two additional
submenus are displayed in which you specify the
changeover date and time.