Endress+Hauser Liquistation CSF48 - Extended Setup

Inputs: SAC Liquistation CSF48
158
15.1.4 Manual hold
--> "Inputs: General/Frequently occurring functions" section  ä 108
15.2 Extended setup
15.2.1 Measured value formats
15.2.2 Cleaning
--> "Inputs: General/Frequently occurring functions" section  ä 108
15.2.3 Calibration settings
Calibration timer and calibration expiration date
--> "Inputs: General/Frequently occurring functions" section  ä 108
Path: Menu/Setup/Inputs/SAC/Extended setup
Function Options Info
Temperature format Options
•#.#
•#.##
Factory setting
#.#
Select how many decimal places should be used to
display the temperature.
Main value format Options
•#.#
•#.##
• #.###
•#
Factory setting
#.#
Specify the number of decimal places for the main value.
Unit Options
•None
•%
•mg/l
•ppm
•1/m
Factory setting
Depends on "Basic applica-
tion"
The unit of the main value depends on the basic
application selected. Depending on this setting only
certain units are available for selection.