Liquistation CSF48 Programming
57
4.3 Program types: Standard and Advanced
A Standard program can comprise a maximum of 5 subprograms. An Advanced program can
comprise a maximum of 24 subprograms. These subprograms can be run simultaneously or con-
secutively.
Each event subprogram can consist of up to 3 conditions.
As the device contains dual bottle trays, you can assign a program easily, and easily detect a
change in the program.
4.3.1 Settings for the Standard program
Path: Menu/Setup/Sampling programs
Function Options Info
Setup program
New A list of all the programs created is displayed. For this
reason, it is often helpful to add an "S" for Standard in
the program name.
Standard
Program name Customized text Use a distinct name for your sampling program. The
program name can be up to 16 characters long.
Bottle configuration Choice of all possible bottle
combinations
The ordered bottle configuration is preset or the con-
figuration selected in the setup is displayed.
Bottle volume 0 to 100000 ml
Factory setting
30000 ml
Set the bottle volume.
The preset value depends on the bottle configuration
configured. The bottle volume is always 30 l for indi-
vidual containers.
In the case of asymmetric distribution, e.g.
6x3l+2x13l, you can set the bottle volume
on the left and right in the menu items that
follow.
Start condition Options
•Immediate
•Date/time
•Volume
Factory setting
Immediate
The sampling program can be started either immedi-
ately, at a specific, configurable time, or when a cer-
tain totalized flow is reached.
If Start condition Date/time is selected:
Start date 01.01.2000 to 31.12.2099
Factory setting
DD.MM.YYYY
Set the start date for the sampling program. The for-
mat depends on the option configured under general
settings.
Start time 00:00:00 to 23:59:59
Factory setting
HH:MM:SS (24h)
Set the time when the sampling program is started.
The format depends on the option configured under
general settings.
If Start condition Volume is selected:
To Next Page
Loading...
