Inputs: Nitrate Liquistation CSF48
162
16 Inputs: Nitrate
16.1 Basic settings
16.1.1 Sensor identification
16.1.2 Application
Calibration data records are saved under an individual name in the nitrate sensor. A new
sensor is calibrated at the factory and always has a corresponding data record. You can add
additional data records during each calibration. These are then available for selection
under "Application".
16.1.3 Damping
--> "Inputs: General/Frequently occurring functions" section ä 108
16.1.4 Manual hold
--> "Inputs: General/Frequently occurring functions" section ä 108
Path: Menu/Setup/Inputs/<Sensor type>
Function Options Info
Channel Options
•On
•Off
Factory setting
On
On
The channel display is switched on in the measuring
mode
Off
The channel is not displayed in the measuring mode,
regardless of whether a sensor is connected or not.
Sensor type Read only
(Only available if a sensor is
connected)
Connected sensor type
Order code Order code of the connected sensor
Path: Menu/Setup/Inputs/Nitrate
Function Options Info
Application Depends on the sensor Select a saved calibration data record
To Next Page
Loading...
