Liquistation CSF48 Inputs
29
Unit of flow Options
•l/s
•m³/s
•m³/h
•m
3
/d
•cfs
•cfm
•gpm
•gph
•mgd
Factory setting
l/s
Select the unit.
Unit of totalized flow Options
•l
•m³
•cf
•gal
Factory setting
m³
Select the unit for the totalized flow.
Meas. value format Factory setting
#.#
Specify the number of decimal places for the flow.
Minimum flow 0 to 10000 l/s
Factory setting
0 l/s
The set limit value prevents sampling if the flow falls
below this value (only for time/flow-paced sampling)).
Lower range value 0 to 10000 l/s
Factory setting
0 l/s
Enter a value for the start of the measuring range.
0/4 mA is assigned to this value as per your specifica-
tions.
Upper range value 0 to 10000 l/s
Factory setting
100000 l/s
Enter a value for the end of the measuring range.
20 mA is assigned to this value as per your specifica-
tions.
Damping 0 to 60 s
Factory setting
0 s
The damping causes a floating average curve of the
measured values over the time specified.
Path: Menu/Setup/Inputs
Function Options Info
To Next Page
Loading...
