Endress+Hauser Liquistation CSF48 - Page 146

Operation Liquistation CSF48
146 Endress+Hauser
The "Setup program" display contains the "ESC", "MAN", "?" and "OFF" soft keys.
Path: Setup program
Function Info
ESC Back to the overview.
Any program currently running is canceled.
MAN Manual sampling can be configured and started here. Any program currently running is paused.
-> See "Sampling program/Manual sampling" section
? A help text is displayed for the item.
OFF If no program is enabled, the device can be switched off here.
If a program is enabled, the following options appear:
Power down sampler:
Following a confirmation prompt, the device is set to the standby mode. Power continues to be
supplied to the device and the LED flashes green.
Stop program %0V:
1)
Stops a program currently running following a confirmation prompt. The overview display
appears.
Pause program %0V:
Is selected if maintenance work is pending. The program is paused and the pause time is entered
in the logbook. The current program is resumed when the "Resume program" button is pressed.
Path: Program active
Function Info
ESC Back to the overview.
Any program currently running is canceled.
STAT For selecting statistics about measured values, sampling and inputs
See "Display settings" section.
OFF If no program is enabled, the device can be switched off here.
If a program is enabled, the following options appear:
Power down sampler:
Following a confirmation prompt, the device is set to the standby mode. Power continues to be
supplied to the device and the LED flashes green.
Stop program %0V:
1)
Stops a program currently running following a confirmation prompt. The overview display
appears.
Pause program %0V:
Is selected if maintenance work is pending. The program is paused and the pause time is entered
in the logbook. The current program is resumed when the "Resume program" button is pressed.
1) "%0V" here stands for text that depends on the context. This text is generated automatically by the software and
inserted in place of %0V. In the simplest scenario, this could be the name of the measuring channel, for example.