Liquistation CSF48 Operation
Endress+Hauser 145
10.3.4 Selecting and executing the program
In the overview, you can see all the programs created under "Select sampling program". Here, you
also have the possibility of creating a new program with "New". Using the navigator, you can
select the program you want to execute here and then choose from the following items: "Edit",
"Delete", "Start", "Duplicate or "Cancel".
Path: Setup program
Function Info
Edit The selected program is displayed and can be edited. Press the "SAVE" key to save the changes.
Delete The selected program is deleted following a confirmation prompt.
Start The selected program is started immediately. The program can be canceled or paused by pressing
the "OFF" key.
If there are differences between the setup and the selected program, the "Program configuration
contains errors!" message appears, e.g. the bottle configuration in the program does not match the
configuration in the setup. The program is not started. In this example, the actual bottle
configuration must be checked against the configuration in the setup and the program and
changed accordingly. Only the bottle configuration entered in the setup is valid for the program to
be executed.
Duplicate The selected program is duplicated and saved with an ID.
Cancel Back to the overview.
To Next Page
Loading...
