Operation Liquistation CSF48
144 Endress+Hauser
Press the "SAVE" soft key to save the program. In the overview, you can start the program created
under "Select sampling program".
Sampling mode Time paced CTCV
Sampling interval 15 min
Sampling volume 100 ml
Bottle change mode Time
Time interval 06:00
Multiple bottles 0
Enable subprogram Event
Start condition No delay
Activation event
Number of events 1
Event Editor 1
Source of data Current input S:1
Measured value Flow rate
Operating mode Lower limit
Limit value 150 l/s
Hysteresis 5 l/s
Start delay 0 s
Switch off delay 0 s
"ESC" - "ESC"
Sample at enable Yes
Sample at disable No
Stop condition Enable invalid
Synchronize samplings To subprogram start
"SAVE" - "ESC"
Path: Menu/Setup/Sampling programs/Setup program/New
Function Entry for sample program
To Next Page
Loading...
