Liquistation CSF48 Installation
Endress+Hauser 25
Connecting the suction line in the version with the peristaltic pump
1. Unscrew the thread adapter nut (item 3) and the hose gland (item 4) from the side panel.
2. Unscrew the small thread adapter nut (item 1) and remove the hose.
3. Connect the suction line from below as illustrated.
4. Insert the dummy plugs supplied.
a0013705
Fig. 16: Connecting the suction line from the side
(as-delivered state)
1 Small thread adapter nut
2Hose
3 Thread adapter nut
4Hose gland
a0013706
Fig. 17: Suction line connected from below
1 Suction line
To Next Page
Loading...
