Endress+Hauser Liquistation CSF48 - Page 26

Installation Liquistation CSF48
26 Endress+Hauser
5.2.3 Connection of compressed air and sample supply for version with sampling
assembly
1. Connect the sampling assembly (item 1) to the suction line (item 2) and insert the suction
line into the gland (item 3). The suction line terminates in the gland to the distribution arm
(item 4).
2. Connect the black compressed air lines from the sampler (item 6) to the connections on the
sampling assembly.
3. In the case of the Liquistation CSF48 version that does not feature an internal compressor,
connect the black compressed air hose (item 5) to the external compressed air supply.
a0016593
Fig. 18: Connecting compressed air and sample supply
1
2
3
4
5
6
7
Sampling assembly
Suction line
Gland
Gland to the distribution arm
Compressed air hose for external compressed
air supply
"Injection" compressed air line
"Retraction" compressed air line