Endress+Hauser Liquistation CSF48 - Page 33

Liquistation CSF48 Electrical connection
Endress+Hauser 33
6.2.3 Removing the rear panel of the dosing compartment
Open the dosing compartment door to remove the rear panel of the dosing compartment.
6.2.4 Removing the rear panel of the sampling compartment
a0012803
Fig. 25: Screw above the dosing compartment
1 To release the rear panel, turn clockwise with an
Allen key (5 mm)
a0012826
Fig. 26: Lift up the top rear panel and pull it back to
remove it
a0012825
Fig. 27: Remove the bolts on the bottom left and right on
the rear of the dosing compartment
a0012824
Fig. 28: Push up the lower rear panel to remove it
1.
2.