Endress+Hauser Liquistation CSF48 - Page 34

Electrical connection Liquistation CSF48
34 Endress+Hauser
6.2.5 Removing the cover on the power unit
WARNING
!
Device is energized
Incorrect wiring can result in injury or fatality
‣ De-energize the device before removing the cover of the power unit.
1. Release the screw with an Allen key (5 mm).
2. Remove the cover of the power unit from the front.
3. When reassembling make sure that the seals are seated correctly.
a0012831
Fig. 29: Removing the cover on the power unit
2.
1.
3.