Endress+Hauser Proline Promass 80 - Page 140

10 Technical data PROline Promass 80
140 Endress+Hauser
Dimensions Promass A: 4-VCO-4 connection with mounting set
DN 15 flange EN 1092-1 (DIN 2501), JIS or 1/2" flange (ANSI)
Fig. 74: Dimensions Promass A: 4-VCO-4 connection with mounting set DN 15 flange EN 1092-1
(DIN 2501), JIS or 1/2" flange (ANSI)
Mounting set DN 15 flange EN 1092-1 (DIN 2501) PN 40: 1.4539/904L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C E F G K L M N P S LK U di
1 305 273 32 228 160 95 145 393 165 4 x Ø14 120 28 65 17.3 1.1
2 305 273 32 310 160 95 145 475 165 4 x Ø14 120 28 65 17.3 1.8
4 315 283 32 435 220 95 175 600 195 4 x Ø14 150 28 65 17.3 3.5
Loose flanges (not fluid-wetted) made of stainless steel 1.4404/316L
Mounting set DN 15 flange (JIS) 10K: 1.4539/904L, Alloy C-22
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C E F G K L M N P S LK U di
1 305 273 32 228 160 95 145 393 165 4 x Ø15 120 20 70 15.0 1.1
2 305 273 32 310 160 95 145 475 165 4 x Ø15 120 20 70 15.0 1.8
4 315 283 32 435 220 95 175 600 195 4 x Ø15 150 20 70 15.0 3.5
Loose flanges (not fluid-wetted) made of stainless steel 1.4404/316L
Mounting set DN 15 flange (JIS) 20K: 1.4539/904L, Alloy C-22
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C E F G K L M N P S LK U di
1 305 273 32 228 160 95 145 393 165 4 x Ø15 120 14 70 15.0 1.1
2 305 273 32 310 160 95 145 475 165 4 x Ø15 120 14 70 15.0 1.8
4 315 283 32 435 220 95 175 600 195 4 x Ø15 150 14 70 15.0 3.5
F06-80Axxxxx-06-00-xx-xx-004