Endress+Hauser Proline Promass 80 - Page 141

PROline Promass 80 10 Technical data
Endress+Hauser 141
Dimensions Promass A: 4-VCO-4 connection with mounting set 1/4" NPT-F
Fig. 75: Dimensions Promass A: 4-VCO-4 connection with mounting set 1/4" NPT-F
Mounting set 1/2" flange (ANSI) Cl 150: 1.4539/904L, Alloy C-22
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C E F G K L M N P S LK U di
1 1/24" 305 273 32 228 160 88.9 145 393 165 4 x Ø15.7 120 17.7 60.5 15.7 1.1
2 1/12" 305 273 32 310 160 88.9 145 475 165 4 x Ø15.7 120 17.7 60.5 15.7 1.8
4 1/8" 315 283 32 435 220 88.9 175 600 195 4 x Ø15.7 150 17.7 60.5 15.7 3.5
Loose flanges (not fluid-wetted) made of stainless steel 1.4404/316L
Mounting set 1/2" flange (ANSI) Cl 300: 1.4539/904L, Alloy C-22
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C E F G K L M N P S LK U di
1 1/24" 305 273 32 228 160 95.2 145 393 165 4 x Ø15.7 120 20.7 66.5 15.7 1.1
2 1/12" 305 273 32 310 160 95.2 145 475 165 4 x Ø15.7 120 20.7 66.5 15.7 1.8
4 1/8" 315 283 32 435 220 95.2 175 600 195 4 x Ø15.7 150 20.7 66.5 15.7 3.5
Loose flanges (not fluid-wetted) made of stainless steel 1.4404/316L
Mounting set 1/4" NPT-F connection: 1.4539/904L, Alloy C-22
DN A B C E F G K L M P U di
1 305 273 32 228 160 SW 3/4" 145 361 165 120 1/4"-NPT 1.1
2 305 273 32 310 160 SW 3/4" 145 443 165 120 1/4"-NPT 1.8
2
1)
305 273 32 310 160 SW 3/4" 145 443 165 120 1/4"-NPT 1.4
4 315 283 32 435 220 SW 3/4" 175 568 195 150 1/4"-NPT 3.5
4
1)
315 283 32 435 220 SW 3/4" 175 568 195 150 1/4"-NPT 3.0
1)
High pressure version available in 1.4539/904L only
F06-80Axxxxx-06-00-xx-xx-002