Endress+Hauser Proline Promass 80 - Page 147

PROline Promass 80 10 Technical data
Endress+Hauser 147
Flange ANSI B16.5 / Cl 150: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
3/8" 350 291 59 88.9 402 4 x Ø15.7 20 60.5 15.70 8.55
15 1/2" 350 291 59 88.9 438 4 x Ø15.7 20 60.5 15.70 11.38
15
2)
1/2" 350 291 59 88.9 572 4 x Ø15.7 19 60.5 17.07 17.07
25 1" 350 291 59 108.0 578 4 x Ø15.7 23 79.2 26.70 17.07
25
2)
1" 377 305 72 108.0 700 4 x Ø15.7 22 79.2 25.60 25.60
40 1 1/2" 377 305 72 127.0 708 4 x Ø15.7 26 98.6 40.90 25.60
40
2)
1 1/2" 406 320 86 127.0 819 4 x Ø15.7 24 98.6 35.62 35.62
50 2" 406 320 86 152.4 827 4 x Ø19.1 28 120.7 52.60 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
Flange ANSI B16.5 / Cl 300: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
3/8" 350 291 59 95.3 402 4 x Ø15.7 20 66.5 15.70 8.55
15 1/2" 350 291 59 95.3 438 4 x Ø15.7 20 66.5 15.70 11.38
15
2)
1/2" 350 291 59 95.3 572 4 x Ø15.7 19 66.5 17.07 17.07
25 1" 350 291 59 124.0 578 4 x Ø19.1 23 88.9 26.70 17.07
25
2)
1" 377 305 72 124.0 700 4 x Ø19.1 22 88.9 25.60 25.60
40 1 1/2" 377 305 72 155.4 708 4 x Ø22.4 26 114.3 40.90 25.60
40
2)
1 1/2" 406 320 86 155.4 819 4 x Ø22.4 24 114.3 35.62 35.62
50 2" 406 320 86 165.1 827 8 x Ø19.1 28 127.0 52.60 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
Flange ANSI B16.5 / Cl 600: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
3/8" 350 291 59 95.3 402 4 x Ø15.7 20 66.5 13.80 8.55
15 1/2" 350 291 59 95.3 438 4 x Ø15.7 20 66.5 13.80 11.38
15
2)
1/2" 350 291 59 95.3 578 4 x Ø15.7 22 66.5 17.07 17.07
25 1" 350 291 59 124.0 578 4 x Ø19.1 23 88.9 24.40 17.07
25
2)
1" 377 305 72 124.0 706 4 x Ø19.1 25 88.9 25.60 25.60
40 1 1/2" 377 305 72 155.4 708 4 x Ø22.4 28 114.3 38.10 25.60
40
2)
1 1/2" 406 320 86 155.4 825 4 x Ø22.4 29 114.3 35.62 35.62
50 2" 406 320 86 165.1 832 8 x Ø19.1 33 127.0 49.30 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I