Endress+Hauser Proline Promass 80 - Page 149

PROline Promass 80 10 Technical data
Endress+Hauser 149
Dimensions Promass I: Tri-Clamp connections
Fig. 81: Dimensions Promass I: Tri-Clamp connections
Tri-Clamp / 3A version
1)
: titanium grade 2
DN Clamp A B C G L U di
8 1" 350 291 59 50.4 427 22.1 8.55
15 1" 350 291 59 50.4 463 22.1 11.38
15
2)
see 3/4" Tri-Clamp connection
25 1" 350 291 59 50.4 603 22.1 17.07
25
2)
1" 377 305 72 50.4 730 22.1 25.60
40 1 1/2" 377 305 72 50.4 731 34.8 25.60
40
2)
1 1/2" 406 320 86 50.4 849 34.8 35.62
50 2" 406 320 86 63.9 850 47.5 35.62
1)
3A version (Ra ≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
1/2" Tri-Clamp / 3A version
1)
: titanium grade 2
DN Clamp A B C G L U di
8 1/2" 350 291 59 25.0 426 9.5 8.55
15 1/2" 350 291 59 25.0 462 9.5 11.38
1)
3A version (Ra ≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
3/4" Tri-Clamp / 3A version
1)
: titanium grade 2
DN Clamp A B C G L U di
8 3/4" 350 291 59 25.0 426 16.0 8.55
15 3/4" 350 291 59 25.0 462 16.0 11.38
15
2)
3/4" 350 291 59 25.0 602 16.0 17.07
1)
3A version (Ra ≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
2)
DN 15 “FB” = Full bore versions of Promass I
F06-80Ixxxxx-06-00-xx-xx-001