5 Operation PROline Promass 80
46 Endress+Hauser
13
0 not assigned –
1 not assigned –
2 not assigned –
3 not assigned –
4 not assigned –
5 586 The fluid properties do not allow a continuation of the
measurement.
6 587 Extreme process conditions exist.
The measuring system can therefore not be started.
7 588 Overdriving of the internal analog to digital converter.
A continuation of the measurement is no longer possible!
14
0 not assigned –
1 not assigned –
2 not assigned –
3 601 Positive zero return active
4 not assigned –
5 not assigned –
6 not assigned –
7 611 Simulation current output 1 active
15
0 612 Simulation current output 2 active
1 not assigned –
2 not assigned –
3 621 Simulation frequency output active
4 not assigned –
5 not assigned –
6 not assigned –
7 631 Simulation pulse output active
16
0 not assigned –
1 not assigned –
2 not assigned –
3 641 Simulation status output active
4 not assigned –
5 not assigned –
6 not assigned –
7 not assigned –
Byte Bit Error No. Short error description ( → Page 62 ff. )
To Next Page
Loading...
