Endress+Hauser Proline Prosonic Flow 93T Portable - Page 107

Proline Prosonic Flow 93T Portable Description of Device Functions
Endress+Hauser 107
Function group LIQUID DATA
LINER MATERIAL
(6528)
This function displays the liner material of the pipe determined via the value entered in
the function PIPE STANDARD (6520). If you edit the predetermined value the pipe
standard will be reset to the option OTHERS and the function NOMINAL DIAMETER
(6521) does not appear.
If a pipe standard was not available for selection and the selection OTHERS was made
in the function PIPE STANDARD (6520) the liner material must be specified here.
Options
LINER NONE
MORTAR
TAR EPOXY
OTHERS
Factory setting
LINER NONE
SOUND VELOCITY LINER
(6529)
!
Note!
This function does not appear if the option LINER NONE was selected in the function
LINER MATERIAL (6528).
This function displays the sound velocity of the liner determined via the value entered
in the function LINER MATERIAL (6528). If you edit the predetermined value the
liner material will be reset to the option OTHERS.
If a liner material was not available for selection and the selection OTHER was made in
the function LINER MATERIAL (6528) the sound velocity of the liner must be entered
here.
User input
Fixed-point number 800 to 6500 m/s
Factory setting
Depending on the selection in the function LINER MATERIAL (6528)
LINER THICKNESS
(6528)
!
Note!
This function does not appear if the option LINER NONE was selected in the function
LINER MATERIAL (6528).
Use this function to enter the thickness of the liner.
User input
Fixed-point number 0.1 to 100.0 mm
Factory setting
0 mm
Functional description
BASIC FUNCTIONS PROCESS PARAMETER LIQUID DATA
LIQUID
(6540)
Use this function to select the liquid in the pipe.
Options
WATER, SEA WATER, DISTILLED WATER, AMMONIA, ALCOHOL, BENZENE,
BROMIDE, ETHANOL, GLYCOL, KEROSENE, MILK, METHANOL, TOLUOL,
LUBRICATING OIL, FUEL OIL, PETROL, OTHER
!
Note!
The selection specifies the values for the sound velocity and viscosity. If OTHER is
selected, these must be entered via the SOUND VELOCITY LIQUID (6542) and
VISCOSITY (6543) functions.
Factory setting
Water
Functional description
BASIC FUNCTION PROCESS PARAMETER PIPE DATA