Endress+Hauser Proline Prosonic Flow 93T Portable - 2 Identification; Device Designation; Nameplate of the Transmitter

Proline Prosonic Flow 93T Portable Identification
Endress+Hauser 7
2 Identification
2.1 Device designation
The "Prosonic Flow 93T" flowmeter system consists of the following components:
• Prosonic Flow 93 transmitter
•Sensor:
– Prosonic Flow P Clamp On version (DN 15 to 65 / ½ to 2½")
– Prosonic Flow P Clamp On version (DN 50 to 4000 / 2 to 160")
The transmitter and the sensor are connected by a cable.
2.1.1 Nameplate of the transmitter
A0011554
Fig. 1: Nameplate specifications for the "Prosonic Flow 93T" transmitter (example)
1 Order code/serial number: See the specifications on the order confirmation for the meanings of the individual
letters and digits
2 Power supply/power consumption
3 Permitted ambient temperature range
4 Degree of protection
N12895
Prosonic Flow 93T Portable
Order Code:
Ser.No.:
93TA1-BBBEAA
0°C(+32°F) <Tamb< +60°C(+140°F)
12V DC
370434-0001B
12345678901
IP40
Ident No.: 93TA1-123456
1.5 A
I-OUT: Active: 0/4...20 mA, RL max = 700 Ohm
Passive: 0/4...20 mA, max. 30V DC, Ri<150 Ohm
I-IN:
Passive: 0/4...20 mA, max. 30 V DC, Ri<150 Ohm
i