Technical data Proline Prosonic Flow 93T Portable
62 Endress+Hauser
10.1.9 Operating conditions: process
Medium temperature range Prosonic Flow P sensor
DN 15 to 65 (½ to 2½")
• Standard: –40 to +100 °C (–40 to +212 °F)
• Optional: –40 to +150 °C (–40 to +302 °F)
DN 50 to 4000 (2 to 160")
• Standard: –40 to +80 °C (–40 to +176 °F)
• Optional: 0 to +170 °C (+32 to +338 °F)
DDU18 sensor (accessories: sound velocity measurement)
• Standard: –40 to +80 °C (–40 to +176 °F)
• Optional: 0 to +170 °C (+32 to +338 °F)
DDU20 sensor (accessories: wall thickness measurement)
–10 to +60 °C (+14 to +140 °F)
Medium pressure range
(nominal pressure)
No pressure limitation, however perfect measurement requires that the static fluid pressure is higher
than vapor pressure.
Pressure loss There is no pressure loss.
10.1.10 Mechanical construction
Design / dimensions The dimensions and lengths of the sensor and transmitter are provided in the separate "Technical
Information" document on the device in question. This can be downloaded as a PDF file from
www.endress.com.
A list of the "Technical Information" documents available is provided on ä 64.
Weight Transmitter
1.6 kg (3.53 lbs)
Sensor Prosonic Flow P
• DN 15 to 65 (½ to 2½") (incl. mounting material):
1.78 kg (3.9 lbs)
• DN 50 to 4000 (2 to 160") (incl. mounting material): 2.8 kg (6.2 lbs)
Sensor (accessories)
• Prosonic Flow DDU18 (incl. mounting material): 2.4 kg (5.3 lbs)
• Prosonic Flow DDU20 (incl. mounting material): 0.23 kg (0.5 lbs)
!
Note!
Weight information without packaging material.
To Next Page
Loading...
