Endress+Hauser Proline Prosonic Flow 93T Portable User Manual

Proline Prosonic Flow 93T Portable Commissioning
Endress+Hauser 43
6.3.2 Quick Setup "Commissioning"
All the device parameters important for standard measuring mode, as well as additional functions,
can be configured easily and quickly using the Quick Setup menu.
A0015474-en
Fig. 42: Quick Setup "Commissioning"
!
Note!
• The display returns to the function SETUP COMMISSIONING (1002) if you press the ESC key
combination during parameter interrogation.
• If you answer YES to the question regarding the "Automatic configuration of the display", the
display lines are assigned as follows:
– Main line = volume flow
– Additional line = totalizer 1
– Information line = operating/system condition
+
+
+
E
m
n
E
Esc
E
+
-
XXX.XXX.XX
HOME-POSITION
Commission
Language
System Units
Presetting
Quick Setup
QS
1002
2000
Volume flow
Temperature
Viscosity
Length
Velocity
Quit
Configure another unit?
NOYES
Unit
Unit
Unit
Unit
Unit
Unit
Volume Flow
Temperature
Viscosity
Length
Velocity
Totalizer
Selection
System units
0402
0422
0423
0424
0425
3001
B
Autom. Configuration of the display?
NOYES
Automatical configuration
of the display
Current configuration
of the display persists
m Only units not yet configured in the current Quick Setup are offered for selection in each cycle. The volume unit is
derived from the volume flow unit.
n The "YES" option remains visible until all the units have been configured.
"NO" is the only option displayed when no further units are available.
o Only outputs not yet configured in the current Quick Setup are offered for selection in each cycle.

Endress+Hauser Proline Prosonic Flow 93T Portable Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93T Portable
Category	Measuring Instruments
Language	English