Proline Prosonic Flow 93T Portable Description of Device Functions
Endress+Hauser 65
11 Description of Device Functions
11.1 Function matrix
11.1.1 General layout of the function matrix
The function matrix consists of four levels:
Blocks -> Groups -> Function groups -> Functions
A0000961
Blocks (A, B, C, etc.)
The blocks are the highest-level grouping of the operation options for the device.
Examples of blocks available are MEASURED VARIABLES, QUICK SETUP, USER INTERFACE,
TOTALIZERS, etc.
Groups (AAA, AEA, CAA, etc.)
A block consists of one or more groups. Each group represents a more detailed selection of the
operation options in the higher-order block. Examples of groups available in the USER INTERFACE
block are CONTROL, MAIN LINE, ADDITIONAL LINE, etc.
Functions (0000, 0001, 0002, etc.)
Each function group consists of one or more functions. The functions are used to operate and
parameterize the device. Numerical values can be entered or parameters selected and saved.
Examples of functions available in the BASIC CONFIGURATION function group are LANGUAGE,
DISPLAY DAMPING, CONTRAST LCD, etc.
If the operating language of the device is to be changed, for example, proceed as follows:
1. Select the block USER INTERFACE.
2. Select the group CONTROL.
3. Select the function group BASIC CONFIGURATION.
4. Select the function LANGUAGE (here you can set the language required).
Function groups (000, 020, 060, etc.)
A group consists of one or more function groups. Each function group represents a more detailed
selection of the operation options in the higher-order group. Examples of function groups available
in the CONTROL group are BASIC CONFIGURATION, UNLOCKING/LOCKING, OPERATION,
etc.
…
…
…
…
…
…
…
…
0001
2001
0401
2021
2201
0002
2002
0402
2022
2202
0003
2003
0403
2023
2203
0009
2009
0409
2029
2209
0429
2049
2069
0421
2041
0422
2042
0423
2043
20632061 2062
0000
2000
0400
2020
2200
0420
2040
2060
000
200
040
202
220
042
204
206
AAA
BAA
ACA
CAA
CBA
D, E, …
A
B
C
To Next Page
Loading...
