22
Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
ELECTRICAL INSTALLATION ECC 320
7. Electrical Installation ECC 320
This section deals with the electrical installation (AC/Ethernet) of the ECC 320.
Components are electrically live. Touching live parts will result in electric shock, burns or
death. Observe the following points before working on the electrical system:
• Apply the 5 safety rules when carrying out installation work in the ECC 320.
• Before carrying out installation work, completely de-energize the entire system.
Danger to life due to electric shock
DANGER
There is an increased risk of injury to persons performing work for which they are neither
qualied nor instructed.
• The ECC 320 may only be installed by persons who are familiar with it, have been infor-
med about hazards, and have the necessary qualications.
• Before installation, fulll all safety-related conditions.
WARNING
Danger due to faulty connection
The supply line must be installed hard-wired into the existing electrical installation and com-
ply with the nationally applicable legal regulations.
Deactivate all circuit breakers in the main supply line (400 V
AC
).
7.2 Specifications for the Electrical Installation
7.1 De-Energizing the Supply Line
To Next Page
Loading...