EnerCharge ECC 320 - Load Management

39
Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
INITIALIZATION
8.5 Load Management
If necessary, EnerCharge can limit the maximum charging power of the ECC 320. This is advan-
tageous, for example, when integrating regenerative energy systems or when the connected
load is limited, in order to use it specically for charging processes.
The charging power is thus adaptively adjusted to the currently available power at the connec-
tion point. In addition, the operator can read out the power currently being consumed. The load
management values can be adjusted at any time.
> Without management of charging power:
Max. mains connection power: 100 kW
→ Max. charging power: 100 kW
> With load management of charging power:
Max. mains connection power: 100 kW
Max. power from renewable energy sources: 80 kW.
→ Max. charging power: variable from 100 to 180 kW
max. 100 kW
Metering module needed: see 8.5.1 on page 40.
Metering module with master control
already available: see
8.5.2 on page 42.
Load
Management
max. 180 kW
80 kW
100 kW
100 kW
Please contact EnerCharge if you wish to activate load management
for the charging power: „9.8 Customer Service“ on page 50.
G INFORMATION
G INFORMATION
energy supplier
energy supplier