3
Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
Inhaltsverzeichnis
1. General 4
1.1 Structure of this Manual 4
1.2 Safety Notices 5
1.3 Notes on Text Design 5
1.4 Contact Information 5
2. General Information 6
2.1 List of Abbreviations 6
3. Safety Notices 7
3.1 Important Safety Notices 7
3.2 Qualification of Staff 7
4. Preparation for Installation 8
5. Installation 10
5.1 Site Selection 10
5.2 Minimum Spacing 11
5.3 Foundation Dimensions 12
5.4 Foundation Strength Testing 13
5.5 Check the Scope of Delivery 14
5.6 Transport Regulations 15
5.7 Lifting and Lowering the ECC 320 16
5.8 Opening and Closing the ECC 320 18
5.9 Installation on the Foundation 19
6. Wiring Diagrams ECC 320 20
6.1 Connection of KEBA Wallbox 21
7. Electrical Installation ECC 320 22
7.1 De-Energizing the Supply Line 22
7.2 Specifications for the Electrical Installation 22
7.3 Connection of Mail Supply Line 400 V 23
7.4 Cable Cross-Sections AC Supply Line 23
7.5 Disconnect the ECC 320 from the Power Supply 26
7.6 Cable Entry 27
7.7 Electrical Connection of ECC 320 28
7.8 Optional: Connecting a Wallbox via Ethernet 31
7.9 Optional: Konfiguration KEBA 32
7.10 Make the Network Settings 34
7.11 Activate the Line Fault Current Circuit Breaker 36
7.12 Attach the Base Panels 36
7.13 Close and Lock the Service Door 36
7.14 Install AD/DC Module Upgrade 36
8. Initialization 37
8.1 Charging Connectors 37
8.2 Charge Plug CCS 38
8.3 Charge Plug CHAdeMO 38
8.4 Payment System (Direct Payment) 38
8.5 Load Management 39
8.6 Measures after Performed Installation 44
9. Attachments 46
9.1 Dimensions ECC 320 46
9.2 Technical Data 47
9.3 Dimension Drawing of Prefab Foundation 48
9.4 Installation of Manual Switch Disconnector 49
9.5 Installation of Motorized Switch Disconnector 49
9.6 National Usage Restrictions 50
9.7 Copyright 50
9.8 Customer Service 50
9.9 Legal Notice 50
To Next Page
Loading...