EnGenius EOC5611P - 4 Wireless Settings; Switching Operation Mode (System → System Properties )

13





4WirelessSettings
4.1SwitchingOperationMode(System→SystemProperties)
TheEOC5611Psupports4differentoperationmodes:AccessPoint,ClientBridge,WDSBridge,and
ClientRouter.

ClickSystemPropertiesunderSystemSectiontobegin.
.

DeviceName:Specifyanameforthedevice,butitisnotthebroadcastSSID.Itwillbeshownin
SNMPmanagement.
Country/Region:SelectaCountry/Regiontoconformlocalregulation.
OperationMode:SelectanoperationmodeviaRadioButton.

ClickApplytosavethechanges.



Note:Ifyou
wouldliketouseAccessPointwithWDSFunctionmode,pleaseselectAccessPoint