EnGenius EOC5611P - Wireless → Wds Link Settings

29

4.6Wireless→WDSLinkSettings
WDSLinkSettingsisusedtoestablishaconnectionbetweenAccessPointsbutthedeviceisnot
losingAccessPointfunction.APhasWDSfunctioncanextendthewirelesscoverageandallowLANs
tocommunicateeachother.

MACAddress
EntertheAccessPoint’sMACaddressthatyouwouldliketoextendthewireless
area.
Mode
SelectDisableorEnablefromthedropdownlist.
Apply/Cancel
PressApplytoapplythechangesorCanceltoreturnpreviousset tings.

Auction:TheAccessPointthatyouwouldliketoextendthewirelessareamustenteryourAccess
Point’ sMACaddress.NotallAccessPointsupportsthisfeature.