EnGenius EOC5611P - Client Bridge Mode → Wireless Network

16
4.2.2ClientBridgeMode→WirelessNetwork

WirelessMode
EOC5611Psupports802.11a/b/gwirelessband.
SSID
SpecifytheSSIDifknown.SSIDtextboxwillbeautomaticallyfillinwhenselectanAP
intheSiteSurvey.
SiteSurvey
UsingSiteSurveytoscannearbyAPsandthenselecttheAPtoestablishthe
connection.
PreferBSSID
SpecifytheMA Caddressifknown.PreferBSSIDtextboxwillbeautomaticallyfillin
whenselectanAPintheSiteSurvey.
WDSClient
PlaceaRadiobuttontoEnable/DisableWDSClient.
Apply/Cancel
PressApplytoapplythechangesorCanceltoreturnpreviousset tings.


Profile
AfterSiteSurvey,webpagewilldisplayallnearbyarea’sAccessPoint.ClicktheBSSID
ifyouwouldliketoconnectwithit.
WirelessSecurity
PleaserefertotheWirelessSecuritysection.
Refresh
PressRefreshtoscanagain.
Auction:IftheAccessPointissuppresseditsownedSSID,SSIDsectionwillbeblank,theSSIDmustbe