Enterasys S4-Chassis User Manual

Enterasys S-Series S4 Chassis Hardware Installation Guide A-1
A
Specifications and Regulatory Compliance
This appendix provides operating specifications for the S4 chassis. Enterasys Networks reserves
the right to change the specifications at any time without notice.
For MTBF information, refer to the following Enterasys Networks support Web site:
http://www.enterasys.com/support/mtbf
S4 Chassis Specifications
Table A-1 S4 Chassis Specifications
Item Specification
S4-Chassis
Dimensions 40 cm x 44.70 cm x 47.32 cm (15.75” x 17.60” x 18.63”)
Weight 24.7 kg (54.45 lb)
S4-Chassis-POE4
Dimensions 48.9 cm x 44.70 cm x 47.32 cm (19.25” x 17.60” x 18.63”)
Weight 36.65 kg (80.8 lb)
Environmental Requirements
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity 5% to 90% (non-condensing)

Enterasys S4-Chassis Specifications

General

Brand	Enterasys
Model	S4-Chassis
Category	Chassis
Language	English