13
Maintenance And Service
Lifting the toP PLate
The top plate of the unit is attached to a pair of hinges and tension cable that will support its weight when
lifted allowing access for servicing. Lift the top plate upwards until the hinge arms can both be pulled com-
pletely outward simultaneously (see Figure 10 and 11 below).
WARNING: Use a helper to support the top plate until the hinges are set to prevent injury.
STEP 1 STEP 3STEP 2
WARNING
PINCH POINT
Figure 10: Lifting the Top Plate
STEP 1 STEP 2 STEP 3
WARNING
PINCH POINT
Figure 11: Top Plate Hinge Mechanism
To Next Page
Loading...
