Enviro S50 - Page 20

20
Maintenance And Service
fRont skiRt
First, remove the door frame from the unit (refer to the remoVing the Door Frame/Skirt section on page
15).
The front skirt is hooked onto the rear chassis using two hooks on each side of the skirt. Simply lift the skirt
up and away from the unit.
Figure 29: Front Skirt Removal
ReaR skiRt
Figure 30: Rear Skirt Removal
Remove the door frame from the unit (refer to the remoVing the Door Frame/Skirt section on page 15).
Next, remove the rear chassis from the unit (refer to the remoVing the rear chaSSiS section of page 17).
Remove the six (6) nuts retaining the rear skirt using a 3/32” (or 9mm) socket (see Figure 30).