134 Setting Up Your Printer on a Network
6. Click Next.
Note:
❏ If the printer driver is installed in the client beforehand, you
need to select the new printer driver or the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
❏ If the print server’s OS is Windows Me, 98, or 95 or the
additional driver for Windows Me, 98, or 95 is installed in the
Windows XP, 2000, NT 4.0, or Server 2003 print server, go to
the next step.
❏ If the additional driver for Windows Me, 98, or 95 is not
installed in the Windows XP, 2000, NT 4.0, or Server 2003
print server, go to “Installing the printer driver from the
CD-ROM” on page 140.
7. Make sure of the name of the shared printer, then select
whether to use the printer as the default printer or not. Click
Next, then follow the on-screen instructions.
Note:
You can change the shared printer’s name so that it appears only on
the client computer.
With Windows XP or 2000
Follow the steps below to set Windows XP or 2000 clients.
You can install the printer driver for the shared printer, if you
have Power Users or more powerful access rights even if you are
not the Administrator.
If the print server’s OS is Windows NT 4.0, confirm the following
items:
To Next Page
Loading...
