258 Functions of the Control Panel
Network Menu
See the Network Guide for each setting.
Note:
This menu may not be available depending on the printer model.
Printer Adjust Menu
Enter the Support Mode by pressing the d Down button while
turning the printer on, to make the Printer Adjust Menu appear.
Note:
This menu is a special function. You don’t have to change it for ordinary
use.
Normal
Adjust the density for normal paper. The setting becomes darker
as the value increases.
Item Settings (default in bold)
Normal 0 ... 5 ... 15
SemiThk 0 ... 5 ... 15
Thick 0 ... 5 ... 15
ExtraThk 0 ... 5 ... 15
Card 0 ... 5 ... 15
Envelope 0 ... 5 ... 15
Feed Offset -3.5 ... 0.0 ... 3.5 mm
Scan Offset -3.5 ... 0.0 ... 3.5 mm
Feed Offset2 -3.5 ... 0.0 ... 3.5 mm
Scan Offset2 -3.5 ... 0.0 ... 3.5 mm
Calibration
To Next Page
Loading...
