EasyManua.ls Logo

Epson Aculaser C1100 Series - Installing the Printer Driver from the CD-ROM

Epson Aculaser C1100 Series
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
140 Setting Up Your Printer on a Network
If the additional driver for Windows NT 4.0 is not installed in
the Windows XP, 2000, or Server 2003 print server or the print
server’s OS is Windows Me, 98, or 95, go to “Installing the
printer driver from the CD-ROM” on page 140.
5. Select whether to use the printer as the default printer or not,
then click Next.
6. Click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the
clients when setting the network system as follows:
The additional drivers are not installed in the Windows XP,
2000, NT 4.0, or Server 2003 print server.
The print server’s OS is Windows Me, 98, or 95 and the client’s
OS is Windows XP, 2000, or NT 4.0.
The on-screen displays on the following pages may differ
depending on the version of Windows OS.
Note:
When installing in Windows XP, 2000, or NT 4.0 clients, you must
access Windows XP, 2000, or NT 4.0 with the Administrator.
If the additional drivers are installed or the computers of the server
and clients use the same OS, you do not have to install the printer
drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click
OK, then follow the on-screen instructions to install the
printer driver from the CD-ROM.

Table of Contents

Other manuals for Epson Aculaser C1100 Series

Related product manuals