206 Troubleshooting
Paper Handling Problems
Paper does not feed properly
Cause What to do
The paper guides are not set
correctly.
Make sure that the paper guides in all
the paper cassettes are set in the correct
paper size positions.
The paper source setting may
not be correct.
Make sure that you have selected the
correct paper source in your application.
There may be no paper in the
cassettes.
Load paper into the selected paper
source.
The size of loaded paper
differs from the control panel
setting.
Make sure that the correct paper size is
set in the control panel’s Paper Source
and MP Tray Size settings.
Too many sheets may be
loaded in the MP tray or paper
cassettes.
Make sure that you have not tried to load
too many sheets of paper. For the
maximum paper capacity for each paper
source, see “MP tray” on page 23.
The paper that is loaded is
curled.
Straighten the paper.
If paper does not feed from the
optional paper cassette unit,
the unit may not be installed
properly.
For instructions on installing the unit,
see “Optional Paper Cassette Unit” on
page 146.
To Next Page
Loading...
