38 Paper Handling
Thick paper and extra thick paper
You can load thick paper (106 to 163 g/m²) or extra thick paper
(164 to 210 g/m²) into the MP tray.
When loading thick or extra thick paper, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings menu in the printer driver.
❏ You can also make these settings on the Tray Menu in the
control panel. See “Tray Menu” on page 251.
Note:
When using thick and extra thick paper, you cannot do duplex printing
automatically. When you want to do duplex printing with thick paper,
set the Paper Type setting on the printer driver to Thick (Back), Extra
Thick (Back) or Thick, Extra Thick, then do the duplex printing
manually.
Transparencies
When loading transparencies, you should make paper settings as
shown below:
❏ Make settings on the Basic Settings menu in the printer driver.
Paper Size: A4, A5, B5, LT, HLT, GLT, or EXE
Paper Source: MP Tray (up to 20 mm thick stack)
Paper Type: Thick or Extra Thick
Paper Size: A4 or LT
Paper Source: MP Tray (up to 75 sheets)
Paper Type: Transparency
To Next Page
Loading...
