194 Troubleshooting
Operational Problems
The Ready light does not turn on
The printer does not print (Ready light off)
Cause What to do
The power cord may not be
properly plugged into the
electrical outlet.
Turn off the printer, check the power
cord connections between the printer
and the electrical outlet, then turn the
printer back on.
The electrical outlet may be
controlled by an outside
switch or an automatic timer.
Make sure that the switch is turned on
or plug another electrical device into the
outlet to check whether the outlet is
operating properly.
Cause What to do
The printer is offline. Press the N Start/Stop button once to
switch the printer to ready status.
To Next Page
Loading...
