Epson Aculaser C1100 Series - Page 157

Installing Options 157
6
6
6
6
6
6
6
6
6
6
6
6
c
Caution:
❏ Do not force the memory module into the slot.
❏ Be sure to insert the memory module facing the correct
way.
❏ You should not remove any modules from the circuit
board. Otherwise, the printer will not work.
5. Reattach the option cover with the screw as shown below.
6. Reconnect the interface cable and power cord and turn the
printer on.
7. To confirm that the option is installed correctly, print a status
sheet. See “Printing a Status Sheet” on page 193.
Note for Windows users:
If EPSON Status Monitor 3 is not installed, you have to make settings
manually in the printer driver. See “Making Optional Settings” on page
62.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete
the printer using Print Setup Utility (for Mac OS X 10.3), Print
Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9),
and then re-register the printer.